Multiplexers
UT16MX115 16:1 Multiplexer
- Multiplexer organization
- 16:1
- Signal-path resistance
- 100 Ω typical
- Package
- 28-lead ceramic flatpack
Specifications
| Part Number | UT16MX115 |
|---|---|
| Flight Grade | QML-Q, QML-V |
| LET (MeV·cm²/mg) | ≤110 |
| TID krad(Si) | 300 |
| Supply Voltage | +4.5V to +5.5V |
| Package | 28-lead FP |
Technical specifications
| Specification | Value | Notes |
|---|---|---|
| Multiplexer organization | 16:1 | |
| Signal-path resistance | 100 Ω typical | |
| Analog supply | 5 V ±10% | Apply the separate digital-supply requirements for this device. |
| Package | 28-lead ceramic flatpack | |
| Ordered total-dose options | 100 or 300 krad(Si) | SMD order-code selections; the selected radiation designator governs assurance. |
Values are subject to the conditions and ordering options in the referenced product documentation.
Product overview
The UT16MX115 is a 16-to-1 analog multiplexer with a SPI/QSPI/MICROWIRE serial interface. Break-before-make switching and rail-to-rail signal handling support channel selection across the analog supply range. An asynchronous reset provides direct control of the multiplexer state. An external digital supply powers the digital circuitry. The device supports analog signal routing through a low-resistance path while maintaining a separate control interface. The datasheet details supply connections, interface timing and channel switching so the selected control method can be integrated into the surrounding acquisition circuitry.
Documentation
Technical documents and resources
For product questions or additional technical information, contact Frontgrade https://www.frontgrade.com/contact-us-form.
Datasheet
IBIS Model
More about this product
Product features
- Break-before-make switching
- Rail-to-rail input signal handling
- Asynchronous reset
- SPI/QSPI/MICROWIRE serial control
Match the control interface
The UT16MX115 uses SPI/QSPI/MICROWIRE serial control. An external digital supply powers the digital circuitry. See the datasheet timing diagrams and supply connections before implementing the interface.
Initialize the interface
Apply the digital supply before or simultaneously with the analog supply as required by the datasheet.
Discuss your application
Contact Frontgrade to discuss UT16MX115 16:1 Multiplexer and the requirements of your application.