Space-Grade FPGAs
UT24CP1008 CertusPro™-NX-RT
- Embedded block RAM
- 3,744 kbit
- Large RAM
- 3,584 kbit
- PCIe hard IP
- Gen1/Gen2; up to 4 lanes
Specifications
| Part Number | UT24CP1008 |
|---|---|
| Grade | Space PEM L1, L2, QD |
| LET (MeV·cm²/mg) | ≤80 |
| TID krad(Si) | 100 |
| Logic Cells | 96000 |
| Package | 484-Lead PBGA |
Technical specifications
| Specification | Value | Notes |
|---|---|---|
| Logic cells | 96k | Logic-cell count uses LUTs × 1.2 effectiveness. |
| 18 × 18 multipliers | 156 | |
| Embedded block RAM | 3,744 kbit | |
| Large RAM | 3,584 kbit | |
| SERDES | Up to 8 channels; 625 Mbps–6.25 Gbps per channel | Observe published device/lot-specific channel 3 PMA clock-divider limitation. |
| PCIe hard IP | Gen1/Gen2; up to 4 lanes | |
| Package | 484-ball plastic BGA; 0.8 mm pitch | |
| Radiation assurance | 100 krad(Si) | R order code; effective dose rate 1 rad(Si)/s. |
Values are subject to the conditions and ordering options in the referenced product documentation.
Product overview
The UT24CP1008 CertusPro-NX-RT is a radiation-tolerant FPGA for programmable processing and high-speed interface designs. Its 28 nm FD-SOI architecture combines 96k logic cells, DSP multipliers, embedded memory, and eight SERDES channels. External memory support and PCIe Gen1/Gen2 hard IP provide connections to processors and data paths. Security features include AES-256 bitstream encryption and ECDSA authentication, while soft-error detection and correction and memory ECC support fault management. The device is offered in a 484-ball plastic BGA package and is supported by Lattice Radiant design tools and configurable IP for application-specific logic.
Documentation
Technical documents and resources
For product questions or additional technical information, contact Frontgrade https://www.frontgrade.com/contact-us-form.
Product Brief
Please complete the form to download the file.
Datasheet
Please complete the form to download the file.
Application Notes
ADEPT Notifications
More about this product
Product features
- 28 nm FD-SOI architecture
- Eight SERDES channels
- AES-256 encryption and ECDSA authentication
- Soft-error detection/correction and memory ECC
- DDR3/DDR3L and LPDDR memory interfaces
Configuration security and resilience
Encryption and authentication protect configuration data, while the device’s soft-error detection and correction features and ECC-capable memory support fault management.
Package and screening options
The ordering table lists Space PEM QD as the base screening flow, with X1 and X2 options for additional Space PEM L1 and L2 screening. Select the complete ordering code for the required flow.
Applications
- Programmable payload processing
- Spaceborne control systems
Discuss your application
Contact Frontgrade to discuss UT24CP1008 CertusPro™-NX-RT and the requirements of your application.