Logic Devices
UT54ACTS74 FLIP-FLOPs Dual D with Clear and Preset
- Logic function
- Dual D flip-flops with clear and preset
- Type
- Logic Devices
- Part
- UT54ACTS74E
Specifications
| Part Number | UT54ACTS74E |
|---|---|
| Flight Grade | QML-Q, QML-V |
| LET (MeV·cm²/mg) | ≤120 |
| TID krad(Si) | 1000 |
| Input Buffer | TTL |
| Supply Voltage | =+3.3V+5V |
| Package | 14-Lead Flat Pack |
Technical specifications
| Specification | Value | Notes |
|---|---|---|
| Logic function | Dual D flip-flops with clear and preset | |
| Recommended supply voltage | 3.0 to 5.5 V | Recommended operating conditions; use the exact ACS or ACTS electrical table for input thresholds. |
| Operating case temperature | -55°C to +125°C | Recommended operating conditions; prototype screening may be room-temperature only. |
| Package options | 14-lead flatpack | Package availability depends on orderable variant. |
| Screening process options | QML Q or QML V | Select the applicable ordering option; prototype flow does not imply QML screening. |
| Total-dose capability | Up to 1 Mrad(Si) | Radiation-assured ordering option only; specify applicable SMD RHA level. Prototype/commercial flows do not imply radiation assurance. |
Values are subject to the conditions and ordering options in the referenced product documentation.
Product overview
UT54ACTS74E contains two independent D-type flip-flops that capture data on the positive-going clock edge. Active-low preset and clear inputs set or reset the outputs independently of the data and clock inputs. Data meeting the setup and hold requirements transfers to the outputs when preset and clear are inactive. Its recommended supply range is 3.0 to 5.5 V. The device is characterized over a case-temperature range of -55°C to +125°C. QML Q and QML V process options are documented; select the orderable device and screening level for the required application.
Documentation
Technical documents and resources
For product questions or additional technical information, contact Frontgrade https://www.frontgrade.com/contact-us-form.
Datasheet
Application Notes
More about this product
Product features
- Independent preset and clear controls
- QML Q and QML V process options
Logic operation
UT54ACTS74E contains two independent D-type flip-flops that capture data on the positive-going clock edge. Active-low preset and clear inputs set or reset the outputs independently of the data and clock inputs. Data meeting the setup and hold requirements transfers to the outputs when preset and clear are inactive.
Applications
- Clocked data storage
Discuss your application
Contact Frontgrade to discuss UT54ACTS74E Dual D Flip-Flops with Clear and Preset and the requirements of your application.