Logic Devices
UT54ACS164245S/SE 16-bit Multipurpose Transceiver
- Bus width
- 16 bits; two independent 8-bit sections
- Bus voltage translation
- 3.3 V and 5 V
- Type
- Logic Devices
Specifications
| Part Number | UT54ACS164245S/SE |
|---|---|
| Flight Grade | QML-Q, QML-V |
| LET (MeV·cm²/mg) | ≤114 |
| TID krad(Si) | 1000 |
| Supply Voltage | +3.3V to +5.0V |
| Type | Cold Sparing |
| Package | 48-lead FP |
Technical specifications
| Specification | Value | Notes |
|---|---|---|
| Bus width | 16 bits; two independent 8-bit sections | |
| Bus voltage translation | 3.3 V and 5 V | |
| Package | 48-lead flatpack, 25 mil pitch | Use the exact SMD device type; S/SE and SEI are not treated as interchangeable. |
| Total-dose capability | 100 krad(Si) | Use the exact SMD device type; S/SE and SEI are not treated as interchangeable. |
Values are subject to the conditions and ordering options in the referenced product documentation.
Product overview
The UT54ACS164245S/SE is a 16-bit bidirectional transceiver for asynchronous bus communication, signal buffering, and voltage translation. It interfaces 3.3 V and 5 V CMOS buses and uses Schmitt trigger inputs to filter noisy signals. Direction and output-enable controls support either two independent eight-bit transceivers or one 16-bit transceiver. Balanced outputs and low on-state output impedance support capacitive loads and low-impedance backplanes. The device provides cold sparing; the applicable power-supply sequence and operating mode must follow the specific S/SE or SEI datasheet.
Documentation
Technical documents and resources
For product questions or additional technical information, contact Frontgrade https://www.frontgrade.com/contact-us-form.
Datasheet
Application Notes
ADEPT Notifications
More about this product
Product features
- 3.3 V/5 V bus translation
- Schmitt trigger inputs
- Independent byte-level direction and enable control
- Cold sparing
Bus translation and sparing
It interfaces 3.3 V and 5 V CMOS buses and uses Schmitt trigger inputs to filter noisy signals. Direction and output-enable controls support either two independent eight-bit transceivers or one 16-bit transceiver. Balanced outputs and low on-state output impedance support capacitive loads and low-impedance backplanes.
Applications
- Asynchronous bus communication
- Voltage translation
- Signal buffering
- Cold-spare interfaces
Discuss your application
Contact Frontgrade to discuss UT54ACS164245S/SE 16-bit Multipurpose Transceiver and the requirements of your application.