I/O & Interface Modules
SpaceVPX System Ethernet I/F Module (SEIM-PS)
- Form factor
- 3U, 160 mm SpaceVPX
- Type
- I/O & Interface Modules
- Part
- SEIM-PS
Specifications
| Part Number | SEIM-PS |
|---|---|
| Form Factor | 3U SpaceVPX |
| Processor | N/A |
| Front Panel Connectivity | (8) 10M-10GBase-T |
| Carrier Board | N/A |
| Available Grades | FM3/Class C (Level 3 Parts); FM4/Class D (COTS); EDU (Commercial) |
Technical specifications
| Specification | Value | Notes |
|---|---|---|
| Form factor | 3U, 160 mm SpaceVPX | |
| 5 Gbps build rates | 10M, 100M, 1G, 2.5G, 5G | Marvell 882040L-based build only. |
| 10 Gbps build rates | 10M, 100M, 1G, 2.5G, 5G, 10G | Marvell 88X3340-based build only. |
Values are subject to the conditions and ordering options in the referenced product documentation.
Product overview
The SEIM-PS is a SpaceVPX Ethernet interface module for extending a processing system’s external network connectivity. It uses quad-port Ethernet transceivers connected to the processing system through USXGMII host links. Supported line rates depend on the transceiver build, with 5 Gbps and 10 Gbps PHY options described in the family documentation. An onboard UT32M0R500 microcontroller configures the transceivers and reports module health. The 3U architecture provides a modular way to add network connections while retaining local interface monitoring and configuration.
Documentation
Product Brief
More about this product
Product features
- Quad-port Ethernet transceiver options
- USXGMII host-side connectivity
- Microcontroller-managed configuration and health monitoring
Ethernet transceiver options
The SEIM advanced brief describes 5 Gbps and 10 Gbps PHY options using quad-port transceivers. The selected transceiver determines the maximum supported line rate.
Discuss your application
Contact Frontgrade to discuss SpaceVPX System Ethernet I/F Module (SEIM-PS) and the requirements of your application.