Digital-to-Analog Converters
RHD 5930 Digital-to-Analog Converter, 11-Bit, Ladder Output
- Resolution
- 11 bits
- Output type
- Unbuffered resistor ladder
- Nominal output impedance
- Approximately 5 kΩ
Specifications
| Part Number | 5930-7 |
|---|---|
| Flight Grade | Commercial |
| Resolution | 11 |
| Settling Time | 2.75 us |
| Power Consumption | 20 mW |
| Weight | 0.8 grams |
| Sel Immune | > 100 MeV·cm²/mg |
| Package | 16 leads, Hermetic ceramic SOIC 0.417"L x 0.300"W x 0.120"Ht |
Technical specifications
| Specification | Value | Notes |
|---|---|---|
| Resolution | 11 bits | |
| Supply voltage | 3.3 V to 5.0 V | Operating-supply feature; electrical limits are specified at +5.0 V unless otherwise stated. This does not establish 3.3 V post-radiation characterization. |
| Output type | Unbuffered resistor ladder | |
| Nominal output impedance | Approximately 5 kΩ | |
| Screening | Commercial flow; +25 °C testing only | Exact model 5930-7; ordering table page 5. |
Values are subject to the conditions and ordering options in the referenced product documentation.
Product overview
The RHD5930 is an 11-bit digital-to-analog converter built around a CMOS R/2R Kelvin resistor network. Digital inputs control switches that connect the reference signals to the resistor ladder, producing an unbuffered analog output. The reference inputs can accept static or dynamic signals within the supply range, enabling multiplying-DAC operation. The device can also operate in an inverted configuration for current-output applications into a low-impedance node. Supported uses include digital potentiometers and programmable voltage sources. Designers can select the ordering flow that matches their screening and radiation-assurance requirements.
Documentation
Technical documents and resources
For product questions or additional technical information, contact Frontgrade https://www.frontgrade.com/contact-us-form.
More about this product
Product features
- Unbuffered ladder output
- Four-quadrant multiplying operation
- CMOS/TTL-compatible digital inputs
- Static or dynamic reference inputs within the supply range
Choose the reference and output stage
Use the reference inputs to set the DAC span. The ladder output is unbuffered, so the external load or amplifier must be considered when establishing accuracy and output swing.
Applications
- Digital potentiometers
- Programmable voltage sources
Discuss your application
Contact Frontgrade to discuss RHD 5930 Digital-to-Analog Converter, 11-Bit, Ladder Output and the requirements of your application.