Comparators
RHD 5910 Quad Comparator High Speed RadHard-by-Design
- Comparator channels
- 4
- Input signal range
- Within the included power-supply range
- Type
- Comparators
Specifications
| Part Number | 5910-7 |
|---|---|
| Flight Grade | Commercial |
| Supply Voltage | Single power supply operation at 5.0V |
| Input Offset Voltage | -60 mV to 60 mV |
| Output Delay | 200 ns |
| Output Type | Digital |
| Sel Immune | >100 MeV·cm²/mg |
| Package | 16-pin, Hermetic ceramic SOIC .417"L x .300"W x .120"Ht |
Technical specifications
| Specification | Value | Notes |
|---|---|---|
| Comparator channels | 4 | |
| Single-supply operation | 3.3 V or 5.0 V | Operating-supply feature; electrical limits are specified at +5.0 V unless otherwise stated. This does not establish 3.3 V post-radiation characterization. |
| Input signal range | Within the included power-supply range | |
| Screening | Commercial flow; +25 °C testing only | Exact model 5910-7; ordering table page 6. |
Values are subject to the conditions and ordering options in the referenced product documentation.
Product overview
The RHD5910 provides four high-speed comparators for continuous comparison of dynamic input signals. Each comparator behaves as a high-gain, open-loop amplifier with a digital output, accepting input signals within the included supply range. The design uses specific circuit topology and layout methods to mitigate ionizing-dose effects and single-event latchup. Inputs and outputs include diode protection, and the CMOS output stages tolerate momentary shorts. External feedback hysteresis is the designer’s responsibility where slow signals or small input differences could cause noise-driven output transitions. Screening and radiation assurance depend on the ordering option.
Documentation
Technical documents and resources
For product questions or additional technical information, contact Frontgrade https://www.frontgrade.com/contact-us-form.
More about this product
Product features
- Four continuous comparators
- Digital outputs for dynamic analog comparisons
- Diode-protected inputs and outputs
- Momentary-short tolerance
Account for input noise
For slow inputs or small voltage differences, add appropriate feedback hysteresis to avoid output chatter. Switching-delay conditions are specified separately in the datasheet.
Applications
- Dynamic signal comparison
- Military and space electronics
Discuss your application
Contact Frontgrade to discuss RHD 5910 Quad Comparator High Speed RadHard-by-Design and the requirements of your application.