Operational Amplifiers
RHD 5901 Quad Operational Amplifier with Hi-Z Output Control RadHard-by-Design
- Amplifier channels
- 4
- Dual-supply operation
- ±1.65 V to ±2.5 V
- Enable grouping
- Two amplifier pairs
Specifications
| Part Number | 5901-901-2S |
|---|---|
| Flight Grade | DLA RHA Certified |
| Supply Voltage | +5.0V |
| Input Offset Voltage | -3 to 3 mV |
| PSSR | 90 dB |
| CMRR | 60 dB |
| Sel Immune | >100 MeV·cm²/mg |
| Package | 16-pin, Hermetic ceramic SOIC Solder Dipped .417"L x .300"W x .120"Ht |
Technical specifications
| Specification | Value | Notes |
|---|---|---|
| Amplifier channels | 4 | |
| Single-supply operation | 3.3 V to 5.0 V | Operating-supply feature; electrical limits are specified at +5.0 V unless otherwise stated. This does not establish 3.3 V post-radiation characterization. |
| Dual-supply operation | ±1.65 V to ±2.5 V | |
| Enable grouping | Two amplifier pairs | |
| Ordered radiation assurance | 1 Mrad(Si) | Only the exact 5901-901-2S RHA ordering option; dose-rate conditions remain per datasheet. Published family dose rate: 50–300 rad(Si)/s. Irradiation bias and electrical-test supply conditions must follow the datasheet; no assurance at an uncharacterized voltage is implied. |
Values are subject to the conditions and ordering options in the referenced product documentation.
Product overview
The RHD5901 combines four operational amplifiers with enable controls that operate in pairs. Disabling a pair places those amplifiers in a power-down condition and their outputs in a high-impedance state. This supports signal paths in which several amplifiers feed a common output while inactive channels are disabled. Rail-to-rail input and output operation helps preserve usable signal range. The CMOS amplifiers support resistive and capacitive loads within the datasheet limits and are unity-gain stable under normal conditions. Ordering options define the screening flow and any radiation-assurance commitment for the selected part.
Documentation
Technical documents and resources
For product questions or additional technical information, contact Frontgrade https://www.frontgrade.com/contact-us-form.
More about this product
Product features
- Pairwise amplifier enable/disable
- High-impedance outputs when disabled
- Rail-to-rail inputs and outputs
- Power-down control for inactive amplifier pairs
Control shared analog outputs
Pairwise enables can place inactive amplifiers in a high-impedance state. Review loading and timing before combining amplifier outputs.
Applications
- Analog signal conditioning
- Military and space electronics
Discuss your application
Contact Frontgrade to discuss RHD 5901 Quad Operational Amplifier with Hi-Z Output Control RadHard-by-Design and the requirements of your application.